Hi,
Congratulations for your products that are smart but I have problems with my FG805.
This generator, that embeds the last firmware versions (xxx 130 and xxx 50) hangs very often.
Today I didn't find a way for taking over its control again (the 1st line of display toggles between "F :__________ SINE" and "T:________ SINE" without any effect of key press)
Presently I dont see any other mean to recover than flashing again the main microcontroller and starting again from a known situation.
Any suggestion ?
I feel since the beginning that the user interface is "touchy", some improvements in terms of robustness would be nice for getting a reliable behavior.
It would be great if you could add a special key combination or a key behavior that always allow product recovering if it hangs or in case of eeprom corruption that prevents the product to start well...
Kind Regards,
Jerome
FG805
Re: FG805
Hello,
Thanks for this return.
Your diagnostic is good: the F/T button is failing, its spring hasn't a correct strength for a frank contact disconnection when released, I will replace it.
Congratulation for the quality of your support.
Kind Regards,
Jerome
Thanks for this return.
Your diagnostic is good: the F/T button is failing, its spring hasn't a correct strength for a frank contact disconnection when released, I will replace it.
Congratulation for the quality of your support.
Kind Regards,
Jerome