Damaged Channel 1

Dual channel oscilloscope
Post Reply
claytonc100
Posts: 1
Joined: Thu Jul 20, 2023 8:31 pm

Damaged Channel 1

Post by claytonc100 »

Hi All,

I managed to damage my unit while testing a car amplifier whilst being charged from the USB Port in the car. I opened the unit and found 3 traces burned up and channel 1 was showing a lot of noise. I traced the issue to being the main processor. Channel 2 still works so I would imagine that only the digital input is damaged.

I wired channel 1 to pin PA11 instead of PA0. Is it possible to modify the firmware to change the input? I would manager to salvage the other channel and restore it to fully working condition.

Regards,
Clayton
Attachments
Screenshot_2023-07-22-20-28-29-20_e2d5b3f32b79de1d45acd1fad96fbb0f.jpg
Post Reply