Powering off issue

Dual channel oscilloscope
Post Reply
r0lu
Posts: 2
Joined: Thu Aug 05, 2021 9:46 am

Powering off issue

Post by r0lu »

Hi,
When I trying to power off my device, it says that in 5 seconds it will be turned off. But timer starts again from 9, and won't turn off. Looks like an infinite process. Is there any solution to fix powering off device issue?

P.S. I found video on YouTube with the similar problem.
https://youtu.be/CCru28HkEAI
r0lu
Posts: 2
Joined: Thu Aug 05, 2021 9:46 am

Re: Powering off issue

Post by r0lu »

Issue is solved. After reading the assembly guide more carefully, I've realised that I missed to remove resistors R49 and R50. It needs to be done after BOB1 and BOB2 are soldered.
Post Reply