Firmware:
1 ) Beta version 113-15801-070a released. See details https://jyetech.com/wave2-firmware/.
Document:
1 ) Added "WAVE2: How to upgrade firmware" https://jyetech.com/download/1318/WAVE2 ... rmware.pdf.
2 ) Added "WAVE2 Serial Interface" https://jyetech.com/wp-content/uploads/ ... erface.pdf.
Tool:
Added STM32 Flash Loader Demonstrator download link https://jyetech.com/wp-content/uploads/ ... mcu005.zip.
WAVE2 update (as of June 21, 2020)
Re: WAVE2 update (as of June 21, 2020)
Hi there. I am interested in adding support for WAVE 2 onto my PC Scope app for DSO 068 and DSO112 I posted back here on this forum. If you want to collaborate in that area, please send me PM.
Re: WAVE2 update (as of June 21, 2020)
I've upgraded to 076 as in the document described.
after that, the second boot screen shows "FFFF" on the top right.
the YT screen shows a red 'F' right of the Hold indicator.
was that before? i don't remember.
it does not hold the VPOS, i have to align VPOS on every boot up.
several freezes/reboots under different conditions.
reproducible when change Trigger to E.
in short, unusable
i switched back to 061.
after that, the second boot screen shows "FFFF" on the top right.
the YT screen shows a red 'F' right of the Hold indicator.
was that before? i don't remember.
it does not hold the VPOS, i have to align VPOS on every boot up.
several freezes/reboots under different conditions.
reproducible when change Trigger to E.
in short, unusable
i switched back to 061.
Re: WAVE2 update (as of June 21, 2020)
so, question is why and what.
can anybody confirm that trigger to E produces a reboot? bug?
the md5 of my download: cf337375b6db68d1d441b3ae7cf88bca 113-15801-076.hex
corrupted?
there are some features in 076 that i would like to have, not only serial.
edit. the described FFFF and red F stays when when switching back to 061.
they disappears when i chose DEFAULT at the main menu
after trying 076 a third time things seems to work.
can anybody confirm that trigger to E produces a reboot? bug?
the md5 of my download: cf337375b6db68d1d441b3ae7cf88bca 113-15801-076.hex
corrupted?
there are some features in 076 that i would like to have, not only serial.
edit. the described FFFF and red F stays when when switching back to 061.
they disappears when i chose DEFAULT at the main menu
after trying 076 a third time things seems to work.
Re: WAVE2 update (as of June 21, 2020)
After firmware upgrade please execute the DEFAULT button. This will make the device to normal.
Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
Re: WAVE2 update (as of June 21, 2020)
After firmware upgrade please execute the DEFAULT button. This will make the device to normal.
Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
Re: WAVE2 update (as of June 21, 2020)
Just a note. Of all the upgrade methods and boards available, I found the stm32cube programmer v2.5 from ST to be the easiest to use. It runs on just about any OS. Version is now up to v2.6.