Page 1 of 1

WAVE2 update (as of June 21, 2020)

Posted: Mon Jun 22, 2020 3:14 am
by jye1
Firmware:

1 ) Beta version 113-15801-070a released. See details https://jyetech.com/wave2-firmware/.

Document:

1 ) Added "WAVE2: How to upgrade firmware" https://jyetech.com/download/1318/WAVE2 ... rmware.pdf.
2 ) Added "WAVE2 Serial Interface" https://jyetech.com/wp-content/uploads/ ... erface.pdf.

Tool:

Added STM32 Flash Loader Demonstrator download link https://jyetech.com/wp-content/uploads/ ... mcu005.zip.

Re: WAVE2 update (as of June 21, 2020)

Posted: Sun Jul 05, 2020 12:46 pm
by shop
Hi there. I am interested in adding support for WAVE 2 onto my PC Scope app for DSO 068 and DSO112 I posted back here on this forum. If you want to collaborate in that area, please send me PM.

Re: WAVE2 update (as of June 21, 2020)

Posted: Sat Feb 06, 2021 6:40 am
by chris16
I've upgraded to 076 as in the document described.
after that, the second boot screen shows "FFFF" on the top right.
the YT screen shows a red 'F' right of the Hold indicator.
was that before? i don't remember.

it does not hold the VPOS, i have to align VPOS on every boot up.
several freezes/reboots under different conditions.
reproducible when change Trigger to E.

in short, unusable :(
i switched back to 061.

Re: WAVE2 update (as of June 21, 2020)

Posted: Tue Feb 09, 2021 7:33 am
by chris16
so, question is why and what.
can anybody confirm that trigger to E produces a reboot? bug?
the md5 of my download: cf337375b6db68d1d441b3ae7cf88bca 113-15801-076.hex
corrupted?

there are some features in 076 that i would like to have, not only serial.

edit. the described FFFF and red F stays when when switching back to 061.
they disappears when i chose DEFAULT at the main menu :roll:
after trying 076 a third time things seems to work.

Re: WAVE2 update (as of June 21, 2020)

Posted: Fri Feb 12, 2021 11:56 pm
by jye1
After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar
(98.6 KiB) Downloaded 380 times

Re: WAVE2 update (as of June 21, 2020)

Posted: Fri Feb 12, 2021 11:56 pm
by jye1
After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar

Re: WAVE2 update (as of June 21, 2020)

Posted: Sat Mar 13, 2021 6:30 pm
by tmdso
Just a note. Of all the upgrade methods and boards available, I found the stm32cube programmer v2.5 from ST to be the easiest to use. It runs on just about any OS. Version is now up to v2.6.