WAVE2 update (as of June 21, 2020)

Dual channel oscilloscope
Post Reply
jye1
Posts: 1221
Joined: Wed Feb 20, 2013 4:58 pm

WAVE2 update (as of June 21, 2020)

Post by jye1 »

Firmware:

1 ) Beta version 113-15801-070a released. See details https://jyetech.com/wave2-firmware/.

Document:

1 ) Added "WAVE2: How to upgrade firmware" https://jyetech.com/download/1318/WAVE2 ... rmware.pdf.
2 ) Added "WAVE2 Serial Interface" https://jyetech.com/wp-content/uploads/ ... erface.pdf.

Tool:

Added STM32 Flash Loader Demonstrator download link https://jyetech.com/wp-content/uploads/ ... mcu005.zip.
shop
Posts: 48
Joined: Thu Jan 11, 2018 3:01 pm

Re: WAVE2 update (as of June 21, 2020)

Post by shop »

Hi there. I am interested in adding support for WAVE 2 onto my PC Scope app for DSO 068 and DSO112 I posted back here on this forum. If you want to collaborate in that area, please send me PM.
chris16
Posts: 4
Joined: Tue May 19, 2020 10:07 am

Re: WAVE2 update (as of June 21, 2020)

Post by chris16 »

I've upgraded to 076 as in the document described.
after that, the second boot screen shows "FFFF" on the top right.
the YT screen shows a red 'F' right of the Hold indicator.
was that before? i don't remember.

it does not hold the VPOS, i have to align VPOS on every boot up.
several freezes/reboots under different conditions.
reproducible when change Trigger to E.

in short, unusable :(
i switched back to 061.
chris16
Posts: 4
Joined: Tue May 19, 2020 10:07 am

Re: WAVE2 update (as of June 21, 2020)

Post by chris16 »

so, question is why and what.
can anybody confirm that trigger to E produces a reboot? bug?
the md5 of my download: cf337375b6db68d1d441b3ae7cf88bca 113-15801-076.hex
corrupted?

there are some features in 076 that i would like to have, not only serial.

edit. the described FFFF and red F stays when when switching back to 061.
they disappears when i chose DEFAULT at the main menu :roll:
after trying 076 a third time things seems to work.
jye1
Posts: 1221
Joined: Wed Feb 20, 2013 4:58 pm

Re: WAVE2 update (as of June 21, 2020)

Post by jye1 »

After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar
(98.6 KiB) Downloaded 1249 times
jye1
Posts: 1221
Joined: Wed Feb 20, 2013 4:58 pm

Re: WAVE2 update (as of June 21, 2020)

Post by jye1 »

After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar
tmdso
Posts: 9
Joined: Mon Dec 12, 2016 11:28 pm

Re: WAVE2 update (as of June 21, 2020)

Post by tmdso »

Just a note. Of all the upgrade methods and boards available, I found the stm32cube programmer v2.5 from ST to be the easiest to use. It runs on just about any OS. Version is now up to v2.6.
Post Reply