DSO138mini Freezes when I press any button

Post Reply
basslike
Posts: 6
Joined: Fri Jun 12, 2015 4:21 pm

DSO138mini Freezes when I press any button

Post by basslike »

I just soldered everything, and tested and looked up for shorts.
When I connect the scope to the usb cable it boots fine, even when I attache to the test loop a probe it a waveform appears, but as soon as I press any button the screen freezes and only a reset rebots the scope.
Any Ideas on what its is happening? Firmware is 111
jye1
Posts: 1221
Joined: Wed Feb 20, 2013 4:58 pm

Re: DSO138mini Freezes when I press any button

Post by jye1 »

Can you test how it behaviors by moving one of the slide switches?
basslike
Posts: 6
Joined: Fri Jun 12, 2015 4:21 pm

Re: DSO138mini Freezes when I press any button

Post by basslike »

jye1 wrote:Can you test how it behaviors by moving one of the slide switches?
It works as expected.
division, coupling etc work. O
Andbro65
Posts: 17
Joined: Tue Jul 31, 2018 12:41 pm

Re: DSO138mini Freezes when I press any button

Post by Andbro65 »

Firmware 111 and the latest on website is the 110....????
basslike
Posts: 6
Joined: Fri Jun 12, 2015 4:21 pm

Re: DSO138mini Freezes when I press any button

Post by basslike »

Andbro65 wrote:Firmware 111 and the latest on website is the 110....????
Yes. its weird.
Maybe I need to flash the website firmware.
Still doesn't work
basslike
Posts: 6
Joined: Fri Jun 12, 2015 4:21 pm

Re: DSO138mini Freezes when I press any button

Post by basslike »

Well, I downgraded the firmware to the firmware available on the website. Now it works.
I don't get it, but for now ots working
MorganFlint
Posts: 58
Joined: Sat Jun 06, 2015 9:06 am

Re: DSO138mini Freezes when I press any button

Post by MorganFlint »

Firmware 111 is now available on jyetech's website, dated as recent as 2020.05.09.
Maybe you can try this one again to see if it works now...
Post Reply