Charging battery

Post Reply
Andbro65
Posts: 17
Joined: Tue Jul 31, 2018 12:41 pm

Charging battery

Post by Andbro65 »

Hi,

When I'm charging the battery, the screen the oscilloscope is always On. It's not possible to charging the battery without to have the screen On. It's a mistake?

Thanks
Last edited by Andbro65 on Sun Dec 23, 2018 4:14 pm, edited 1 time in total.
jye1
Posts: 1227
Joined: Wed Feb 20, 2013 4:58 pm

Re: Charging battery

Post by jye1 »

You can do this with H or J version analog board.
Andbro65
Posts: 17
Joined: Tue Jul 31, 2018 12:41 pm

Re: Charging battery

Post by Andbro65 »

Hi,

I have the mainboard version "I" and the analogic board version "H". And it's not possible to charging the battery without to have the screen On.
smokok
Posts: 5
Joined: Fri Jan 25, 2019 6:07 pm

Re: Charging battery

Post by smokok »

Hello jye1. Can you make a battery indicator on the screen in order to monitor it? It will be very convenient and correct. Thank.
mgy
Posts: 1
Joined: Tue Jan 15, 2019 7:58 am

Re: Charging battery

Post by mgy »

Andbro65 wrote:Hi,

When I'm charging the battery, the screen the oscilloscope is always On. It's not possible to charging the battery without to have the screen On. It's a mistake?

Thanks

The D2 diode on the main panel (tipe: 1n5819) solder off.
connect the battery into J6 (if neccessary, use a charger panel, the input voltage is VIN)
The JP4 on, the JP5 and JP6 off.
The oscilloscope will running only if the main switch is on.
Post Reply