Page 1 of 1
Charging battery
Posted: Sat Dec 22, 2018 1:49 pm
by Andbro65
Hi,
When I'm charging the battery, the screen the oscilloscope is always On. It's not possible to charging the battery without to have the screen On. It's a mistake?
Thanks
Re: Charging battery
Posted: Sun Dec 23, 2018 2:36 pm
by jye1
You can do this with H or J version analog board.
Re: Charging battery
Posted: Sun Dec 23, 2018 3:57 pm
by Andbro65
Hi,
I have the mainboard version "I" and the analogic board version "H". And it's not possible to charging the battery without to have the screen On.
Re: Charging battery
Posted: Sat Jan 26, 2019 8:20 am
by smokok
Hello jye1. Can you make a battery indicator on the screen in order to monitor it? It will be very convenient and correct. Thank.
Re: Charging battery
Posted: Tue Feb 05, 2019 10:21 am
by mgy
Andbro65 wrote:Hi,
When I'm charging the battery, the screen the oscilloscope is always On. It's not possible to charging the battery without to have the screen On. It's a mistake?
Thanks
The D2 diode on the main panel (tipe: 1n5819) solder off.
connect the battery into J6 (if neccessary, use a charger panel, the input voltage is VIN)
The JP4 on, the JP5 and JP6 off.
The oscilloscope will running only if the main switch is on.