Hi. I have just assembled a 15001K, but in the kit instead of a 330pF capacitor I got a 33pF one. Instead of "331" it is marked "330".
The test voltages are OK and the test waveform is sharp. Is the manual correct or is the one I got correct? And if it's not, should I replace it with a 330pF capacitor?
C2 Capacitor value?
Re: C2 Capacitor value?
Here are two common ways capacitors values can be marked, EIA and ICE
In EIA 330 pF would be 331
In ICE 330 pF would be 330p
http://www.iequalscdvdt.com/Markings_and_Codes.html
In EIA 330 pF would be 331
In ICE 330 pF would be 330p
http://www.iequalscdvdt.com/Markings_and_Codes.html
Re: C2 Capacitor value?
It has an underlined 330 only, but I measured it and it's 0.32nF, so I guess it's the correct value. Thank you for your help.