voltage check

Post Reply
kschewe
Posts: 2
Joined: Thu Jan 24, 2019 5:24 am

voltage check

Post by kschewe »

Hi
when checking the voltages on the test points v1-v3 i get 1.5 mv and 6mv on other. I am not sure if this is ok. I will verifly the board again for correct resistors. It does work and I can see results when assembled and tested with a frequency generator.

I bought from bangood and is legit product
kschewe
Posts: 2
Joined: Thu Jan 24, 2019 5:24 am

Re: voltage check

Post by kschewe »

I have verified all the correct parts. might be good enough with the voltage as is? might be cheaper and save time to buy a different one or brand : :|
Post Reply