Hi PiotrMisiuna ,
I had similar problem ic u1 tl084 was the culprit.try replacing same the do vpos alinment after selecting input coupling as GND.
hope this helps
No sig-gen and no trace - voltages about ok
-
- Posts: 5
- Joined: Thu Apr 26, 2018 5:07 am
-
- Posts: 20
- Joined: Fri Mar 02, 2018 8:33 am
Re: No sig-gen and no trace - voltages about ok
Well, I tried everything but it was beyond me.
Contacted JYE, they sent me a new mother board.
https://youtu.be/Yav-BhD9FwE
Contacted JYE, they sent me a new mother board.
https://youtu.be/Yav-BhD9FwE