EEPROM Failed
EEPROM Failed
Good evening everyone ! I buy dso shell from Banggood and they send to this forum to solve my problem. Before I start to assembled , I check it and everything was fine until step 5 . When I start to calibrate it , from this time the screen shows ***Read EEPROM failed***. I read all the topics in this forum and maybe I need update . Could please anyone say how can I do this ? Also , after update , noticed that something go wrong and always have white screen. If I have this results I want to send this dso shell back and refund me.
-
- Posts: 20
- Joined: Fri Mar 02, 2018 8:33 am
Re: EEPROM Failed
You need a USB-UART interface. Buy it online, but do your research, I had one that didn't work so I need to order different one. If you find this, probably you will find a guide how to do it as well, there is many of those.
Re: EEPROM Failed
Hi, if You didn't solve the issue with the error, check the rotary encoder.
Desolder it from board, power up. If system boots in normal state - encoder is wrongly mounted.
The issue I have with one unit, desoldering the encoder solve the problem - was wrongly mounted on the small board.
BR, Lukasz.
Desolder it from board, power up. If system boots in normal state - encoder is wrongly mounted.
The issue I have with one unit, desoldering the encoder solve the problem - was wrongly mounted on the small board.
BR, Lukasz.