JYE Tech Forum

DSO150 kit from official store Bangood.
Have problems.
First problem - Read eeprom failed.
All voltages ok. input voltage 9.3v!

I write on e-mail jyetek@gmail.com, discribe my problem.
Got answer:

Hi, thank you for contact JYETech. Please try re-flashing the attached firmware and see if it can fix it. This problem happens to some boards but can be fixed with firmware. Please freely let me know if you need further assistance.

Than i re-flash firmware. Successfully.

But now i have all time white display!!!!


Please help me!

Simultaneously press the two middle and ADJ.
If it is OK, you get the reset screen for the activation code.
Hope this help you.

x12345, did you remember to disconnect JP1 and JP2 after flashing the new firmware?

Check twice the encoder. In other post I wrote probably solution for this problem.