DSO150 problems.

Post Reply
x12345
Posts: 1
Joined: Sat Mar 03, 2018 6:43 pm

DSO150 problems.

Post by x12345 »

DSO150 kit from official store Bangood.
Have problems.
First problem - Read eeprom failed.
All voltages ok. input voltage 9.3v!
Image
I write on e-mail jyetek@gmail.com, discribe my problem.
Got answer:
Hi, thank you for contact JYETech. Please try re-flashing the attached firmware and see if it can fix it. This problem happens to some boards but can be fixed with firmware. Please freely let me know if you need further assistance.
Than i re-flash firmware. Successfully.
Image
But now i have all time white display!!!!
Image

Please help me!
RobNL
Posts: 122
Joined: Mon Dec 25, 2017 3:11 pm
Location: The Netherlands
Contact:

Re: DSO150 problems.

Post by RobNL »

Simultaneously press the two middle and ADJ.
If it is OK, you get the reset screen for the activation code.
Hope this help you.
CU, Rob
alphaseek
Posts: 85
Joined: Thu Jan 19, 2017 5:24 pm

Re: DSO150 problems.

Post by alphaseek »

x12345, did you remember to disconnect JP1 and JP2 after flashing the new firmware?
Avatar
Posts: 2
Joined: Mon Apr 02, 2018 12:01 pm

Re: DSO150 problems.

Post by Avatar »

Check twice the encoder. In other post I wrote probably solution for this problem.
Post Reply