[SOLVED] Yet another dial problem

Post Reply
skinkie
Posts: 2
Joined: Fri Sep 29, 2017 10:32 pm

[SOLVED] Yet another dial problem

Post by skinkie »

In this forum many dial problems have been described. Including the FAQ option that the board might have been used the wrong way around. Another topic suggests a short circuit.

The problems that I experience:
  1. I can't get into test mode
  2. The dial works only one way around.
I have attached a photo of the unsoldered board, and it looks to me clear that it was not wrongly mounted.

I am looking for feedback: what can I do to check if the dial itself is faulty, or the board it is mounted to?

With the help of: http://www.jyetech.com/forum/viewtopic. ... 3510#p3510
I got the original hardware to work. It was likely a faulty solder connection.
Attachments
IMG_20170930_012109.jpg
IMG_20170930_012046.jpg
Post Reply