Hello,
i got a new Board and it has a Problem.
I soldered nothing before i test it.
https://youtu.be/wobUVMUpQPI
As you can see in the upper right conor are flashing 2 words and not show 0.0V like in the manual.
Also on the backside the Diode should only blink twice and at my board it dont stop flashing.
So whats wrong with that board?
New DSO 150 broken?
Re: New DSO 150 broken?
What you saw is normal. With firmware version -060 or later trigger level voltage is not shown. Trigger state is displayed instead. The LED will keep flashing if trigger is detected.