JYE Tech Forum

Hello,

I want to buy 10x probes for the scope. I found one, with the following specs:

Model:P6100
Bandwidth:DC-6MHz DC-100MHz
Attenuation Ration:1:10
Input Resistance:1MΩ:10MΩ
Input Capacitance:1X:85pF-120pF 10X:18.5pF-22.5pF
Compensation Range:10pF-30pF
Rise Time:<3.5ns
Working Voltage:1X:<200vDC+ACPeak 10X:<600vDC+ACPeak

Can i use it with the dso shell?

Actually, im a bit confused, becacause the bandwidth..

Thanks.

Yes, you can use it.
Your probe is "too good" for DSO Shell.
It means you could use it on better oscilloscope (by better I mean to use it with the oscilloscope that has higher bandwidth).
I own P6100 and use it with DSO Shell

Good luck.

Best regards,
Tomaz