Is the kit supposed to come with a knob?

Post Reply
DonaldBecker
Posts: 3
Joined: Sun Oct 02, 2016 7:17 pm

Is the kit supposed to come with a knob?

Post by DonaldBecker »

I ordered my kit from Banggood as soon as I saw that it was available.

I recently put it together, and discovered that it didn't have a knob for the rotary encoder. I recall previous pictures that showed the assembled version with a knob, but the current pictures do not show it. Was there supposed to be one in the kit?
jye1
Posts: 1228
Joined: Wed Feb 20, 2013 4:58 pm

Re: Is the kit supposed to come with a knob?

Post by jye1 »

Can you post photo showing your board?
Balu
Posts: 3
Joined: Wed Nov 30, 2016 3:30 pm

Re: Is the kit supposed to come with a knob?

Post by Balu »

Is it possible you got the green beta board Banggood is selling (without the case)?

That does not come with a rotary encoder. The product description says " Note: The beta version does not need to install the rotary switch. The rotary switch on the photo is for reference only."

Also it needs an extra wire because of a missing trace on the board.

I have built one, but I can't figure out how to calibrate it, because the manual does not show the required values. If you figure out how to do that, please let me know.
Post Reply