Now it works!! Yea

Post Reply
adula
Posts: 12
Joined: Tue Feb 02, 2016 11:50 pm

Now it works!! Yea

Post by adula »

I posted several days ago about a white screed. I received a message to check the 2 40 pin connectors. I had 2 bad solder joints on the LCD board connector and now it works. I will have to get use to using this unit as it about 40 years since I used a scope.

By the way I would like to monitor the 120 VAC mains and am using a 10X probe. Will this work or am I overdriving the unit?


Thanks again for the help.

Alex
bobydunkel
Posts: 20
Joined: Tue Dec 15, 2015 12:06 pm

Re: Now it works!! Yea

Post by bobydunkel »

adula wrote: By the way I would like to monitor the 120 VAC mains and am using a 10X probe. Will this work or am I overdriving the unit?
Better find 120VAC to 12VAC , something like this http://www.jameco.com/1/1/342-adu120150 ... ac-ac.html
It is not smart to fiddle with mains... Just my 2 cents...

Best regards,
boby
Post Reply