DSO 138 USB
DSO 138 USB
Hi all,can any one tell me what the usb is for on this Oscilloscope,is it for pc conection,like to show screen on pc or somthing?
Re: DSO 138 USB
The USB has no function as of current firmware. It is for future or user hacking.
Re: DSO 138 USB
Hi There, 1st post here.
My question is can I solder two wires on to the PCB on the positive and negative of the un-used USB port and use it as a power socket to feed the JYE Tech DSO138 Power DC/DC Converter with the JYE 140 so I can charge a 3.7 volt LIPO battery?. So I can run the DSO 138 Oscilloscope on battery only.
My question is can I solder two wires on to the PCB on the positive and negative of the un-used USB port and use it as a power socket to feed the JYE Tech DSO138 Power DC/DC Converter with the JYE 140 so I can charge a 3.7 volt LIPO battery?. So I can run the DSO 138 Oscilloscope on battery only.
Re: DSO 138 USB
The VBUS pin of USB connector was not connected to anything. It is okay to do as you said.
Re: DSO 138 USB
Thank you for the reply. now I have to wait for the parts to arrive. I will let you know the outcome. Regards