TP25 shows -9.70V - no trace
Re: TP25 shows -9.70V - no trace
I just want to see parameters were set to normal. Sometimes the scope could appear no activity with some settings.
Re: TP25 shows -9.70V - no trace
Here's a pic of when it is on.
I can change values with the buttons etc.
Regards,
I can change values with the buttons etc.
Regards,
Re: TP25 shows -9.70V - no trace
Please try VPOS alignment and change trigger mode to AUTO. Do not us SING which requires trigger to do waveform update.
By the way, the kit you purchased was a counterfeit one.
By the way, the kit you purchased was a counterfeit one.
Re: TP25 shows -9.70V - no trace
Okay, I had something like a trace now :O Pretty erratic before the screen went white. I'll have to debug that.
Sorry I wasted your time on a counterfeit product problem
You really should work on expanding your distribution network, so we can buy your legit (and quality) product
Sorry I wasted your time on a counterfeit product problem
You really should work on expanding your distribution network, so we can buy your legit (and quality) product