Page 1 of 1

L2 verify values

Posted: Sat May 30, 2020 2:48 am
by TheDrip
I managed to destroy inductor L2 (don't ask!)

From the schematics, this is 1mH 1A. I have been having a difficult time trying to find an inductor with those values in the 6x8mm form factor.

It seems likely the schematics may have a typo.

Can anyone confirm L2 should be 1mH 1A and not something like 1mH 0.1A ?

Thank you

Re: L2 verify values

Posted: Mon Jun 08, 2020 7:23 pm
by davef
There was a modified diagram published recently that showed the current rating as 0.5A. Search the recent posts.

Wasn't as recent as I recalled!