LDC board pinout

Post Reply
DvdZmd
Posts: 1
Joined: Sat Jul 07, 2018 12:27 am

LDC board pinout

Post by DvdZmd »

Greetings, i'm begining a college project and I chose to make a osciloscope replaying the schematic of the DSO138 but totally programed by me in my cortex M3 microcontroller.
The first part that I'm encaring is the display connection and his programing. For that i'm studying the https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf
My question is about the pins for control the comunication type, the IM [3:0] pins for the display of the DSO138's display.
Seeing this link https://jyetech.com/Products/FunctionMo ... 00-00A.pdf, that HEADER 20X2 is also the pinout that come with my DSO138 I see there only 2 of the 4 pins IM's, the 0 and 3, but not the 1 and 2. Can I use the display with a diferent comunication type?

Thanks
Post Reply