JYE Tech Forum

I've recently completed my kit. All voltages seem to be within normal limits. When the display board is connected to the motherboard there is a series of vertical lines towards the right hand side of the display and what I can best discibe as a random width black stripe towards the left hand side. Can anyone advise please?

Can you post photos showing the problem?

Hello! I'm machutanca. I also have a suspected display. My display lit up during the test on step # 1 but after I assemble the board the analog voltages are wrong and the display is black does not light up like it did when I did step # 1. Can anyone help on this problem. Note: I follow all steps carefully per the written instructions.

My display would only show the white screen, and then would show a number of black stripes on the left side. I re-soldered the 40 pin connector and it comes up fine now.