Flickering white screen
Flickering white screen
Previously the functionality of the board was fine, with all the screen options in working order with the exception of the board not showing the trace. So I replaced the resistors realising I had read the band's incorrectly now the screen is flickering between black and white. The LED does not flash if reset is pressed whilst the board is connected, however does do so if the board is removed or not connected to begin with. Could this be the connection between the MCU and LCD? I've also noticed that R36 seems to heat up when the board is connected. In test mode tge led flsges slowly twice but uoon checking the test points they are all within 0.5V of the troubleshoot values. Any thoughts or advice would be greatly appreciated, thanks