handy lil thing though not really rated for what im doing, working on tube guitar amps.
just figured out how to flash the FW, that takes some doing...just be patient and persistent
i now find it has frequency meter, very handy, rather than the previous system. adjusting sliders...though they have their positive side to, like measuring times between transients... could we implement both systems?
but im finding its in accurate unless the screen is set to certain time units?
say i test signal 1khz, its fine at some time divisions, whereas at others it gives me a skewball reading, like 12k or 52hz or similar.
same applies for other time divisions/frequencies. 1mhz test gives me 250khz...
doesnt seem to acknowledge anything under 100hz reliably at all.
could just be the square wave test signal...
not really an issue but. very handy feature. when set correctly
it also doesnt turn on(the freq meter app), neither does the voltage meter, unless i enter menu and click "default" first.
this one has bugs.