Unit will not charge.

Color oscilloscope with touch panel
Post Reply
Dwebb
Posts: 1
Joined: Wed Jan 21, 2015 12:39 pm

Unit will not charge.

Post by Dwebb »

Just opened box, the card insert says to connect battery and charge 10 hours before use. Manual says to connect to usb and charge, the light will illuminate and go out when done.

When connected to usb the unit functions normally. However with the unit off, it the LED just flickers and does not appear to charge.

Do I need to open the case and make the battery connection to get the unit to operate without being connected to a USB power supply?
jye1
Posts: 1221
Joined: Wed Feb 20, 2013 4:58 pm

Re: Unit will not charge.

Post by jye1 »

The battery needs to be connected to get charged. What the manual said was assuming battery had been connected. So please connect battery and plug in USB cable to try again.

Without battery the LED has no meaning.
Post Reply