Page 1 of 1

Negative voltage on input

Posted: Tue Jul 04, 2017 6:11 am
by Habi
Hello everyone.

Please, excuse my poor English. :roll:

I have a DSO112 that sometimes after power it on the input just showed a maximum negative signal, independent of scale. After some fiddling, it worked again as normal.

But now it’s doing permanently, always negative both on AC and DC coupling but about cero on GND. :(

Image

I’ve tried to download the schematics on http://www.jyetech.com/forum/viewtopic.php?f=17&t=358, but it seems the files have been corrupted. Anyway, I have opened the oscilloscope to diagnose it.

Image

And to my surprise, there is a negative voltage of about -3.6V on the solid state relay before the connector.

Image

In fact, if I select DC coupling I can measure the same on the crocodiles.

Image

Any ideas of what is happening? Is there an alternate download for the schematics?

Thanks in advance.

Re: Negative voltage on input

Posted: Thu Jul 13, 2017 1:32 am
by jye1
We PM'ed you but didn't see reply.

Re: Negative voltage on input

Posted: Thu Jul 13, 2017 8:53 am
by Habi
Sorry, didn't received notification on PM.

I'll do as instructed. :)

Thanks.