Frozen!

Anything about this unique oscilloscope DIY kit
AlexTzv
Posts: 3
Joined: Fri Oct 28, 2016 4:06 pm

Re: Frozen!

Post by AlexTzv »

bevangg wrote:The unit still freezes when you try to use fft mode, also it randomly freezes completely now in a state where it will not even turn off
There is a problem, but not fix it for some reason
bevangg
Posts: 8
Joined: Tue Mar 08, 2016 2:59 pm

Re: Frozen!

Post by bevangg »

AlexTzv wrote:
bevangg wrote:The unit still freezes when you try to use fft mode, also it randomly freezes completely now in a state where it will not even turn off
There is a problem, but not fix it for some reason
maybe it is a hardware fault?
AlexTzv
Posts: 3
Joined: Fri Oct 28, 2016 4:06 pm

Re: Frozen!

Post by AlexTzv »

Once again thoroughly washed the PCB. Oscilloscope working fine while. Frozen if power off in FFT mode. Keep checking.
Fonzy
Posts: 1
Joined: Mon Nov 14, 2016 4:03 pm

Re: Frozen!

Post by Fonzy »

Hello everybody ! 8-)


I had some fun putting together the ds0 068 and its a nice tool,it does what i wanted from it.
It works fine except that I also have the freeze problem,just as mr AlexTzv says:
AlexTzv wrote:... Oscilloscope working fine while. Frozen if power off in FFT mode. Keep checking.
After powering of in the fft menu means that later you'll be locked in the freq meter menu.
The resistor trick to clean the memory does not work for me.
What does work for me ( to unfreeze) is to reflash with version 113-06801-51 and after that with 113-06801-61.
Immediatly reflashing with version 113-06801-61 does not fix the problem for me.

After the reflashing you still cannot do poweroff in the fft menu.

Best
Fonzy
Post Reply