No trace when set to 1v
Posted: Sat Aug 22, 2015 10:49 am
Hi
I first had the problem discussed here http://www.jyetech.com/forum/viewtopic.php?f=16&t=459
Now I have no signal when the middle switch is set to 1v any combination of the top switch does not show the test signal.
I first had the problem discussed here http://www.jyetech.com/forum/viewtopic.php?f=16&t=459
Now I have no signal when the middle switch is set to 1v any combination of the top switch does not show the test signal.