DSO 068 LCD screen garbled
Posted: Sun Jan 20, 2019 3:13 pm
Right after boot up, the LCD screen looks weird (see picture below). I can see some reaction to button presses, and sometimes it is even readable. I checked all connecions between LCD and main board and resoldered them, but that didn't help. I measured all voltages as per the assembly guide, and found nothing wrong. I noticed that the distance betwen the LCD boeard and the main board is very small (just a few millimeters), and as a precaution I ground all soldering blobs with a dremel to make them as flat as possible. It is very difficult to inspect whether there is a short or not, but I'm prety sure there isn't one.