Wrong firmware version

Anything about this unique oscilloscope DIY kit
Post Reply
BlitzKrieg
Posts: 1
Joined: Wed Jan 24, 2018 8:18 am

Wrong firmware version

Post by BlitzKrieg »

On www.jeytech.com in Firmware section is available firmware with version 113-06801-061 but in real on the oscilloscope screen version is 113-06801-060.
I try to update version to 113-06801-061 but every time i get 113-06801-060. Than i try to update on earlier version 113-06801-051 and get exactly 113-06801-051 on the screen. Than i update it to 113-06801-061 but get 113-06801-060 again.
So i need to update firmware twice only just to understand that 113-06801-061 is 113-06801-060 in fact.
Pls check this issue and change this on site or in firmware. Thanks.
SteveThackery
Posts: 1
Joined: Sat Feb 03, 2018 5:59 pm

Re: Wrong firmware version

Post by SteveThackery »

Confirmed: the latest firmware identifies as -060, despite being labelled -061 on the download page.

I don't know whether -061 has the wrong version number inside it, or whether it is mis-labelled and is actually version -060.
Mod1966
Posts: 23
Joined: Sat Feb 04, 2017 10:51 am

Re: Wrong firmware version

Post by Mod1966 »

Post Reply