Where can i get this Calibrating C5 and C3. On forum. I loked i didnt found it.
Can you post a link.
Thanks.
power suply bob4
Re: power suply bob4
I loket at the bord, on my bord there is place for c3 but fizicaly c3 condenser s not there what this mean. There is empty space on that place.
What now?
What now?
Re: power suply bob4
I have
C6 1pF value of capacitor
C4 3pF value capacitor
can i change C4 ( as changing C6) capacitor for 2 pf or 4 pf, becose i dont ow if femto farad capacitors exsist?
C6 1pF value of capacitor
C4 3pF value capacitor
can i change C4 ( as changing C6) capacitor for 2 pf or 4 pf, becose i dont ow if femto farad capacitors exsist?
Re: power suply bob4
This is the link
viewtopic.php?f=19&t=1108
Please note that the reference number for the capacitors are not the same for DSO068 and DSO Shell. You need to compare their schematics.
viewtopic.php?f=19&t=1108
Please note that the reference number for the capacitors are not the same for DSO068 and DSO Shell. You need to compare their schematics.
Re: power suply bob4
I got from you new bob 3 board and i soldered it on the main board.
Vbus 5.07
V+ 4.901
Bob3 in 4.901
Bob out 0.000
Ok what now this is realy disturbing becose we changed bob3 board and now the same shit
Jp2 is open if i close jp2 then everthong is working
What now
Vbus 5.07
V+ 4.901
Bob3 in 4.901
Bob out 0.000
Ok what now this is realy disturbing becose we changed bob3 board and now the same shit
Jp2 is open if i close jp2 then everthong is working
What now