Hello,
when I finished building and started testing, on step 3 I got "too much" signal wave trace. After searching I found out that problem was broken C5 and C8 adjustable trimmer capacitors. Then, I replaced C5 and C8 with 27pF capacitors and C7 with 100pF as suggested by a forum guy over here, sorry I can't rember your name. But now I get "not enough" signal wave trace, and what do you guys think I need to do? Should I change C6 or what?
Thanks!
"not enough" signal wave.
Re: "not enough" signal wave.
You can replace C6 with a larger cap or place C7 with a smaller cap.