Test signal moving laterally
Test signal moving laterally
I have completed the assembly and set the test signal to the specified settings and I get a rapid movement to the right on the display. If I press the hold button the signal trace appears as it should, but taking the hold off puts the wave on the move laterally again. Any suggestions?
Re: Test signal moving laterally
Please try adjusting the trigger level to see if you can stable it.
-
- Posts: 2
- Joined: Tue Apr 04, 2017 2:39 pm
Re: Test signal moving laterally
can't sync test signal
Re: Test signal moving laterally
What was the timebase you used? Have you tried adjusting trigger level? It would allow us to understand the issue better if you post photos showing the problem.
-
- Posts: 2
- Joined: Tue Apr 04, 2017 2:39 pm
Re: Test signal moving laterally
Found the cause , a defective switch AC-DC-GND switches constantly AC-DC , is Also not healthy JYE 117 .