JyeLab sees COM port but can't connect to 094 oscilloscope
Posted: Sun Mar 22, 2015 9:27 pm
Hi!
I have 094 with latest firmware, CP210x driver and jyeLab 0.70.
When I'm trying to connect jyeLab to my device, I get this message:
I tried to change COM port number, to set baudrate in jyeLab to 9600 as it set in device manager, but still nothing.
When I connected to COM port with telnet, I got silence on that port. Oscilloscope sends these bytes while loading and then just nothing. I don't know if it's ok.
I tried to do this at Win 7 x64 on my computer and then at Win XP 32bit installed in VirtualBox on Macbook but nothing changed.
Please help
I have 094 with latest firmware, CP210x driver and jyeLab 0.70.
When I'm trying to connect jyeLab to my device, I get this message:
Code: Select all
COM3 found
COM3 selected
Baudrate set to 115200 bps
--- Opening COM3 with baudrate 115200 bps
COM3 open successful
Connecting ...
Re-trying ...
*** No device detected ! ***
COM3 closed
Serial port closed
Serial port closed
When I connected to COM port with telnet, I got silence on that port. Oscilloscope sends these bytes while loading and then just nothing. I don't know if it's ok.
Code: Select all
42 4C 0D 0A A3 44 28 FB 4A 00 25 21 10 91 E3
21 21 21 05 90 10 A8 09 FF
Please help