I have 094 with latest firmware, CP210x driver and jyeLab 0.70.
When I'm trying to connect jyeLab to my device, I get this message:
Code: Select all
COM3 found
COM3 selected
Baudrate set to 115200 bps
--- Opening COM3 with baudrate 115200 bps
COM3 open successful
Connecting ...
Re-trying ...
*** No device detected ! ***
COM3 closed
Serial port closed
Serial port closed
When I connected to COM port with telnet, I got silence on that port. Oscilloscope sends these bytes while loading and then just nothing. I don't know if it's ok.
Code: Select all
42 4C 0D 0A A3 44 28 FB 4A 00 25 21 10 91 E3
21 21 21 05 90 10 A8 09 FF
Please help