Page 1 of 1
jyeLab 0.70 problem on WIN7
Posted: Sat May 31, 2014 3:02 pm
by mig21
hello
have a problem with the program's jyelab for win 7
on win xp it is ok!
when a newer version on win7
I have DSO 094
I greet Robert from Poland
Re: jyeLab 0.70 problem on WIN7
Posted: Sun Jun 01, 2014 2:30 pm
by jye1
Did you see virtual com port of DSO094 on Win7? If not please make sure you use correct CD2102 driver on Win7.
Re: jyeLab 0.70 problem on WIN7
Posted: Sun Jun 01, 2014 3:52 pm
by mig21
hello jye1
so I see virtual port on win7 and i'have new drivers cd2102 .
I tried :
-- changing port COM2 and leater COM8-9 (no conflict), baud rate 9600-115200, still the same problem, crashes
-- program jyelab run administrator,and compatibility option win xp .
-- I tried on two different laptops with win7
but
on an old laptop with windows xp program works well ( COM2 , baud rate 115200,)
thank you for your interest in the problem
Robert
Re: jyeLab 0.70 problem on WIN7
Posted: Mon Jun 02, 2014 5:25 pm
by mig21
hello
DSO 094 + WIN7 everything's okey
I reinstalled WIN
Re: jyeLab 0.70 problem on WIN7
Posted: Fri Aug 01, 2014 9:13 pm
by mig21
the problem came back
program does not work on win7
, on xp is ok
Re: jyeLab 0.70 problem on WIN7
Posted: Mon Aug 04, 2014 11:06 pm
by jye1
Did you make any changes to Win7, like new software installed?
Re: jyeLab 0.70 problem on WIN7
Posted: Tue Aug 05, 2014 3:44 pm
by mig21
hello
I installed win xp on my laptop.
but my friend has a laptop with win7 and Program Jyelab (capture run) also works 1minute or 20min then crashes. sometimes freezes immediately.
program is a simple but very poor
maybe they will Extensions for diagnostics of cars
and support other probes CA60 / or other. ;)and accessories silicone case for osyloskop," P___Scope Protective Rubber Case"
thank you
https://plus.google.com/photos/10769374 ... 0008112977
Re: jyeLab 0.70 problem on WIN7
Posted: Wed Dec 31, 2014 8:30 am
by mig21