Page 1 of 1

offset with jyeLab

Posted: Wed Sep 04, 2013 7:38 am
by Rolf
Hello,
I use the DSO094 with jyeLab.
When I capture the screen I get an offset on my PC with both channels. Switching the DSO-channels to gnd also doesn't eliminate this offset.
How can one adjust this on the PC-Screen?
The DSO-Screen shows no offset.

Thank you

Re: offset with jyeLab

Posted: Wed Sep 04, 2013 9:19 pm
by jye1
Just double click on the vertical position indicators. Remember have channel inputs set to GND before doing this.

Re: offset with jyeLab

Posted: Thu Sep 05, 2013 6:11 am
by Rolf
OK, thank you.

Rolf