JYE Tech Forum

Any more suggestions/ideas? Possible the programmer is defective?

Removing libusb0.sys did nothing. Don't know how to run progisp...It seems to be looking for a serial port (com port) this is USBasp on libusb-win32. Also all documents including readme are in Chinese which I cant read. Sorry.

Will try when time permits.

Thanks

My unit has a MEGA48PA and MEGA168PA is that what you were asking? The board P/N is 109-08500-00P. Using the instructions from your webpage for the FG085, Found link for extreme burner 1.4 and jumped thru the hoops to download it. It has a chip selection for a MEGA168/168v/168A. tried it for U5. (re...

Well, found Extreme burner doesn't recognize the programmer if Device manager lists it under USB devices, must be a lib-win32 device. now it finds the programmer, but doesn't recognize the chip to be programmed. (ATMEGA48 or ATMEGA168). Both LED's on the programmer are lit. BTW the board ID on the 0...

Found out it puts out the same error if the programmer is not attached to USB port. Seems it might be the USBasp driver? Tried more than one USB cable just to check.

Following the instructions for firmware update on FG085, with the 07302 module, when I get to the read fuse bits and lock bits...the program fails. Setup as in picture and USBasp driver installed ok per Device manager. "No supported Programmer found". I have the FG085 powered up by it's ow...

I originally put this in the DSO138 Forum, but this is a suggestion, so here it is: :D Hey, I got a big kick out of building this little kit and playing with it. I bought the little serial converter to upgrade the firmware and successfully upgraded it. Neat! This got me interested in the "blue ...

Hey, I got a big kick out of building this little kit and playing with it. I bought the little serial converter to upgrade the firmware and successfully upgraded it. Neat! This got me interested in the "blue pill" for Arduino. This version of the STM32F103C8T6 is the same as the DSO138. Fo...