JYE Tech Forum

OK, so a small update. Maybe this is useful, maybe not: I read on this forum (in the LiPo mod thread) that some of the CP2102 modules sold on the web have a design fault that causes them to run at 4.3V instead of 3.3V as they should. So I checked mine and it turns out it's one of the bad ones, it wa...

I added a CP2102 TTL module (this one: https://www.ebay.com/itm/323388721317) to my DSO Shell in order to be able to receive data on my PC. The TTL module is wired (ground, TX and RX) to J5 on the DSO. I used my PC with Win 10 and Free Serial Port Monitor to try and capture data. I chose the correct...

So a little while back I assembled my DSO150 scope. When I learned about the possibility to send data to PC I wanted to try it, so I bought a USB-UART converter board and installed it in the DSO150. I followed this guide: http://www.rudiswiki.de/wiki9/JyeTechDSO150#Waveform_Visualization I followed ...