Search found 1221 matches

by jye1
Sat Aug 14, 2021 4:37 am
Forum: DSO 112 & 112A (Coral)
Topic: [DSO112A] Input terminals with 2.4v
Replies: 1
Views: 19544

Re: [DSO112A] Input terminals with 2.4v

Please try executing VPos alignment in the menu. This appeared to be a VPos offset mismatch. The scope should be fine.
by jye1
Wed Jul 14, 2021 2:20 pm
Forum: DSO138mini
Topic: JyeTool v0.90
Replies: 2
Views: 16205

Re: JyeTool v0.90

This was an internal tool and not available for download, unfortunately. Almost any serial port tool can be used for communicate with DSO138mini. We recommend Tera Term, which is easy to use and quite universal. For downloading this tool please see https://jyetech.com/drivers/
by jye1
Sat Feb 13, 2021 1:18 am
Forum: Wave2
Topic: lipo battery
Replies: 1
Views: 9910

Re: lipo battery

The voltage reading in the WAVE2 isn't accurate. Error is possible.
by jye1
Fri Feb 12, 2021 11:56 pm
Forum: Wave2
Topic: WAVE2 update (as of June 21, 2020)
Replies: 6
Views: 21068

Re: WAVE2 update (as of June 21, 2020)

After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar
by jye1
Fri Feb 12, 2021 11:56 pm
Forum: Wave2
Topic: WAVE2 update (as of June 21, 2020)
Replies: 6
Views: 21068

Re: WAVE2 update (as of June 21, 2020)

After firmware upgrade please execute the DEFAULT button. This will make the device to normal.

Yes, the -076 version could cause a reboot when the trigger source is set to external. Please try the new version below, which will be released soon.
113-15801-078.rar
(98.6 KiB) Downloaded 1246 times
by jye1
Wed Sep 30, 2020 12:40 pm
Forum: Wave2
Topic: Serial interface for both Wave2 and FG .085F.
Replies: 1
Views: 9784

Re: Serial interface for both Wave2 and FG .085F.

1. For the serial interface of WAVE2 please see https://jyetech.com/wp-content/uploads/Wave2_SerialInterface.pdf . You need to have firmware version -070 or later to get the serial interface feature. The most recent firmware version is -076 which can be downloaded at https://jyetech.com/wave2-firmwa...
by jye1
Mon Jun 22, 2020 3:14 am
Forum: Wave2
Topic: WAVE2 update (as of June 21, 2020)
Replies: 6
Views: 21068

WAVE2 update (as of June 21, 2020)

Firmware: 1 ) Beta version 113-15801-070a released. See details https://jyetech.com/wave2-firmware/ . Document: 1 ) Added "WAVE2: How to upgrade firmware" https://jyetech.com/download/1318/WAVE2_HowToUpgradeFirmware.pdf . 2 ) Added "WAVE2 Serial Interface" https://jyetech.com/wp-...
by jye1
Sun Jan 26, 2020 1:44 am
Forum: DSO Shell
Topic: Half of the buffer wasted?
Replies: 1
Views: 10350

Re: Half of the buffer wasted?

The first half of buffer holds the waveform prior to trigger point. This is useful if you want to see signal behavior before trigger.
by jye1
Thu Sep 26, 2019 12:50 pm
Forum: DSO Shell
Topic: High Sensel voltages, possibly bad analog board(U3)
Replies: 1
Views: 7138

Re: High Sensel voltages, possibly bad analog board(U3)

What was the reference point you used for the voltage measurement? Were all other voltages correct?
by jye1
Tue Sep 10, 2019 8:41 am
Forum: DSO Shell
Topic: [SOLVED] Vpos moving for measurements above 20ms
Replies: 4
Views: 9460

Re: Vpos moving for measurements above 20ms

Sorry for late response. When timebase is set to values above 20ms the scope uses "rolling" display mode. That means the trace shifts from right to left endlessly. New date enters from the right end. If the current display window is not at the right end you won't see the new data right awa...