Search found 2 matches
- Wed Apr 04, 2018 1:11 am
- Forum: DSO138
- Topic: It works, but no trace
- Replies: 2
- Views: 4936
Re: It works, but no trace
With no input signal the voltage at test point V2 should be approximately 1.6V. I assume you have already done the Vpos Alignment. Do the Restore Factory Default procedure. Hold down [+] and [-] buttons simultaneously for 2 seconds. You will need to do the Vpos Alignment again after resetting the d...
- Tue Apr 03, 2018 4:41 am
- Forum: DSO138
- Topic: It works, but no trace
- Replies: 2
- Views: 4936
It works, but no trace
Just finished building the scope, it boots up and displays the right screen with all the notations around the outside, the values change when switches are changed, so it seems to be working, however there is no trace. I have checked all the solder joints, they are fine. I have another scope and a si...