JYE Tech Forum

After several attemps to repair my DSO 068,, I finally got it working. If you ever attempt to upgrade firm ware please make sure you use the correct one. The website and instructions are somewhat un clear and after several attemps and emails to JYE I got it straight. At this time the latest and corr...

Downloaded from JYE website.

avrubd.rar

I have another question for you on the new firmware.

I got the new firmware 113-0605-010 loaded but now the keypad functions are not working.

I noticed that there is a keypad.hex file.

Did you need to load that too?

I did not understand that I needed to reboot DSO during the connecting mode. I did get the FW 113-06805-010 loaded into DSO. V Connect success > Packag [70/70], Data [8.8k/8.8k], Retry [0/0] V Update success: time elapsed: [10.2s], speed: 0.9k/s. Now my keypad and adj functions do not work correctly...

I tried 3 times to connect 100 tried and no connect. > Start download $ Send reset command: [7E ] > Start connect $ <1> Send connect key: 64 $ <2> Send connect key: 64 $ <3> Send connect key: 64 $ <4> Send connect key: 64 $ <5> Send connect key: 64 $ <6> Send connect key: 64 $ <7> Send connect key: ...

Thanks for the response.... I was un able to try to get the firm ware loaded. After spending alot of time on this scope it is getting flustrated. My scope did work and worked great, it did have defective BOB3 and they sent me a new on. After installing the new BOB3 the scope function started to rebo...

I was told to reload firmware. After reading the instructions I assumed that I could do this via the USB port for computer to DSO068 I down loaded AVRUBD from another website (not from JYE website. I was in a .RAR extension which I could do nothing with). Once i launch the program it appears that it...

Jumped JP2, connected to USB power. Voltage at JP4 is 4.98Vdc. Voltage did not change when power up or change menu. Still have garbled LCD screen Will try to reflash firmware . UPDATE: I was able to convert the .RAR files to .ZIP and uncompress files. Following instructions "how to upgrade firm...

Ok, let's see if I can explain what is happening. 1. The below scope display is what appears everytime I boot up or turn scope on without any signal at input. 2. If i adjust timebase to 20Us and touch input to test signal, the scope will go into a loop reboot. 3. If I increase timebase to 50Us then ...

Any time I try to use scope mode I get this display (as shown in picture). Any attempts in trying to input a signal the screen will not change or in most cases add more garbage to display. If I reboot or reset default the LCD will display the same screen as shown in picture. In some cases (depending...