Nope. It was designed to be a self contained unit. They have published the basic source code so that you could modify the code and add that functionality yourself.
Maxx
Search found 17 matches
- Wed Sep 07, 2016 11:58 pm
- Forum: DSO138
- Topic: Connect and control scope via computer?
- Replies: 1
- Views: 4787
- Wed Sep 07, 2016 11:47 pm
- Forum: DSO138
- Topic: Extremely noisy test signal?
- Replies: 1
- Views: 3996
Re: Extremely noisy test signal?
How are you powering the scope? My power supply added a lot of noise to the signal. When I tested it running on a 9v battery, I works perfectly. So I changed to a 9v linear power supply instead of the switch mode one I was using. The noise has gone.
Maxx
Maxx
Re: display
Yes. JYETech have posted previously that a screen that supports the ILI9341 controller should work, also support for the ILI9328 would be coming soon. This thread shows progress made in this area http://www.jyetech.com/forum/viewtopic.php?f=18&t=460&p=1936&hilit=larger#p1936 I don't know...
- Sat Feb 20, 2016 11:14 pm
- Forum: DSO138
- Topic: Probe calibration.
- Replies: 5
- Views: 7874
Re: Probe calibration.
Did you manage to move the little triangle on the left side all the way to the bottom? Can you post a photo when it is down, then we can see how much of the wave form is still missing. It might give a clue as to what needs adjusting.
Maxx
Maxx
- Sat Feb 20, 2016 11:05 pm
- Forum: DSO138
- Topic: Moving the BNC off board?
- Replies: 2
- Views: 5004
Re: Moving the BNC off board?
Thank you for your reply. I'll do that.
Maxx
Maxx
- Sat Feb 20, 2016 11:02 pm
- Forum: DSO138
- Topic: Is 12.3 volts input acceptable?
- Replies: 2
- Views: 4604
Re: Is 12.3 volts input acceptable?
You could put 2 diodes in series with the power supply, that would drop the voltage by about 1.6v putting it safely under 12v.
Your other option is to buy a 12v to 9v, DC-DC step down module. I don't think JYE sell one but you can get them on ebay for a couple of dollars.
Maxx
Your other option is to buy a 12v to 9v, DC-DC step down module. I don't think JYE sell one but you can get them on ebay for a couple of dollars.
Maxx
- Thu Feb 18, 2016 6:14 pm
- Forum: DSO138
- Topic: Moving the BNC off board?
- Replies: 2
- Views: 5004
Moving the BNC off board?
After seeing the excellent cases that have been produced, I'm making my own. I already have my own home made bench power supply, in a distinctive shaped case. I want to put my DSO 138 in the same shaped case. To do this I have to move the screen, switches and buttons off the board and on to the face...
- Thu Feb 11, 2016 1:47 am
- Forum: DSO138
- Topic: My DSO138 Enclosure
- Replies: 8
- Views: 11830
Re: My DSO138 Enclosure
Brilliant. Thank you. I was wondering how you got the screen close to flush with all the pin headers.
It has given me a few ideas.
Thanks
Maxx
It has given me a few ideas.
Thanks
Maxx
- Wed Feb 10, 2016 1:28 am
- Forum: DSO138
- Topic: My DSO138 Enclosure
- Replies: 8
- Views: 11830
Re: My DSO138 Enclosure
Thank you very much.
- Tue Feb 09, 2016 1:32 pm
- Forum: DSO138
- Topic: My DSO138 Enclosure
- Replies: 8
- Views: 11830
Re: My DSO138 Enclosure
That's the nicest enclosure I've seen so far. Would you post more photos and a brief outline of how you made it or what it's made of. I'm looking to make an enclosure for mine, but don't have money for 3D printing, so the more ideas the better.
Thanks for sharing the photo
Maxx
Thanks for sharing the photo
Maxx