Oops! Minimum time base is 0.1ms in learning edition firmware(113-06210-001). It's very slow and useless! Also FFT function seems to be not available.
Would you please provide me a special version of newest firmware in which COL2 is assigned to pin61 (PF0) ?
Search found 4 matches
- Sat Jul 11, 2015 6:55 am
- Forum: DSO 062
- Topic: Some Push Switches don't work
- Replies: 4
- Views: 17867
- Sat Jul 11, 2015 3:03 am
- Forum: DSO 062
- Topic: Some Push Switches don't work
- Replies: 4
- Views: 17867
Re: Some Push Switches don't work
In order to make sure the possibility of problem in PCB pattern between push switches and pin54 of U4 (short circuit with another pattern, for example) I removed soldering of pin54, lifted the pin up from PCB and checked the voltage again. Then I found the same voltage of 1.3V as measured before and...
- Sat Jul 04, 2015 1:22 am
- Forum: DSO 062
- Topic: Some Push Switches don't work
- Replies: 4
- Views: 17867
Re: Some Push Switches don't work
I appriciate your quick reply. I checked the electric continuity between COL2 side terminal of push switches and pin54 of U4, and found it good. I also re-flashed the firmware to version 113-06208-102, and nothing changed. I think something is wrong with pin54 of U4. If you provide special firmware ...
- Mon Jun 29, 2015 7:26 am
- Forum: DSO 062
- Topic: Some Push Switches don't work
- Replies: 4
- Views: 17867
Some Push Switches don't work
I assembled DSO 062 kit (06204KP), and supplied 9V power. Then the bootloader worked fine, oscilloscope software started and everything was thought to be good. But I found that push switches labeled as "-", "LEVEL", SLOPE" and "MODE" didn't work. According to the s...