Search found 56 matches

by MorganFlint
Sun Apr 11, 2021 9:45 am
Forum: DSO138mini
Topic: Latest firmware
Replies: 4
Views: 7273

Re: Latest firmware

There's a newer version (116) posted at jyetech's website
by MorganFlint
Mon Jul 06, 2020 5:01 pm
Forum: DSO Shell
Topic: New alternative firmware
Replies: 6
Views: 11232

Re: New alternative firmware

Thanks again!!
I'm considering buying GD32F303 to try it, I'll post if I do.
by MorganFlint
Mon Jul 06, 2020 4:59 pm
Forum: DSO Shell
Topic: I hope someone can help me.
Replies: 9
Views: 6124

Re: I hope someone can help me.

I liked very much Open DSO-150 V3.1 posted before, but original V64 is also OK
by MorganFlint
Fri Jun 26, 2020 10:34 am
Forum: DSO Shell
Topic: I hope someone can help me.
Replies: 9
Views: 6124

Re: I hope someone can help me.

Also, you may have problems with the WDG_SW setting at the flash utility. Some explanations here.
by MorganFlint
Fri Jun 26, 2020 10:01 am
Forum: DSO Shell
Topic: I hope someone can help me.
Replies: 9
Views: 6124

Re: I hope someone can help me.

Is there anything I need to do after flashing the firmware? I tried a few custom ones and they didn't work. At least with this one (which I've tried in a clone with success), you need to push "OK" at power up the first time to reset default settings. At first, I used the pre-compiled bina...
by MorganFlint
Sun Jun 21, 2020 5:22 pm
Forum: DSO Shell
Topic: I hope someone can help me.
Replies: 9
Views: 6124

Re: I hope someone can help me.

by MorganFlint
Sun Jun 21, 2020 5:08 pm
Forum: DSO Shell
Topic: I hope someone can help me.
Replies: 9
Views: 6124

Re: I hope someone can help me.

You need to flash an official firmware older than version 064 (which was the first one that started to check for fakes): https://jyetech.com/firmware-dso-150-shell/ You can also try one of the alternatives to the official firmware that can be found on this forum; for example: https://jyetech.com/for...
by MorganFlint
Sat May 16, 2020 10:42 am
Forum: DSO Shell
Topic: Alternative firmware to use in an analogue synth?
Replies: 3
Views: 6417

Re: Alternative firmware to use in an analogue synth?

... Its FW source code is also available and there's also an open source version with two channel capabilities)... Just to state that, contrarily of what I thought then, the HW of 138 and 138 mini is quite different, so the open source FWs for 138 would need to be modified to suit 138mini (see my c...
by MorganFlint
Sat May 16, 2020 10:14 am
Forum: DSO138mini
Topic: JP1 & JP2 brought to the edge of the mainboard
Replies: 0
Views: 4702

JP1 & JP2 brought to the edge of the mainboard

I just wanted to share my solution to implement removable jumpers for JP1 and JP2. As you can see in the attached images, I just used a 2x4 pin header installed in J3, and routed CPU's sides of JP1 and JP2 to the pins in parallel with 3.3V and GND of J3 with thin wires. This way, if I install the ju...
by MorganFlint
Sat May 16, 2020 9:33 am
Forum: DSO138mini
Topic: Read protected FW
Replies: 0
Views: 4298

Read protected FW

Hello! I just got a DSO138 mini from Banggood. I assume it's genuine because there has been no fake advice on this model, the serial nº on the screen matches the sticker, and the quality is excellent. FW is ver. 111. As I already had a Shell and a "normal" DSO138, I bought this one to do s...