Search found 5 matches
- Tue Mar 10, 2015 5:16 am
- Forum: DSO 062
- Topic: Screen blank, bad voltage on TP13
- Replies: 9
- Views: 28195
Re: Screen blank, bad voltage on TP13
Well, not for the first time since it started acting up, my DSO 062 isn't really showing the waveforms. The frequency counter is, as it has been, fine. But the screen looks like the ground level (offset?) is way up toward the top, maybe one dot of a 4 dot/5 segment block down. A horizontal line ther...
- Sat Mar 07, 2015 6:07 am
- Forum: DSO 062
- Topic: Screen blank, bad voltage on TP13
- Replies: 9
- Views: 28195
Re: Screen blank, bad voltage on TP13
Rechecking assembly instructions - found why the test frequency didn't work - the wire loop went from outside hole to outside hole. Resoldered to center hole and kept upper hole. Test came to life. Freq = 501Hz. But voltage levels displayed are off. When VPOS is set at 0, bottom of square wave is ab...
- Fri Mar 06, 2015 9:59 pm
- Forum: DSO 062
- Topic: Screen blank, bad voltage on TP13
- Replies: 9
- Views: 28195
Re: Screen blank, bad voltage on TP13
Sorry, posted twice
Walt
Walt
- Fri Mar 06, 2015 9:56 pm
- Forum: DSO 062
- Topic: Screen blank, bad voltage on TP13
- Replies: 9
- Views: 28195
Re: Screen blank, bad voltage on TP13
OK - for #1: 2.27V and 2.25V. Nowhere near 0V in terms of voltages in this system. #2: Vpos cursor bottom screen: 0.73V and 0.79V Cursor mid screen: 1.55V and 1.54V Cursor top screen: 2.42V and 2.42V So those at least follow. #3: 2.35V and 2.70V This is a 24 pin DIP, right? Not as hard to count pins...
- Wed Feb 25, 2015 7:27 pm
- Forum: DSO 062
- Topic: Screen blank, bad voltage on TP13
- Replies: 9
- Views: 28195
Re: Screen blank, bad voltage on TP13
I have a similar problem - wrong voltage at TP13, plus a few other places. My screen and controls all function, but the displayed square wave voltages are a bit high, and there seem to be other oddities. I'm using a FG085 as a source, set at 5V. Sending a 13KHz signal from the FG085 Function Generat...